LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2013 >> Sonata GLS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Air Conditioning System (HEV)) >> Evaporator Temperature Sensor >> Repair Procedures >> Replacement

Repair Procedures: Replacement

WARNING: This page is about a different variant/trim than selected.
  1. Remove the console extension cover (A).
    Fig 1: Locating Console Extension Cover
    G07319459Courtesy of HYUNDAI MOTOR CO.
  2. Remove the crash pad lower cover (A).
    Fig 2: Locating Crash Pad Lower Cover
    G07319460Courtesy of HYUNDAI MOTOR CO.
  3. Disconnect the connector (A).
    Fig 3: Locating Connector
    G07319461Courtesy of HYUNDAI MOTOR CO.
  4. Disconnect the evaporator temp connector (A).
    Fig 4: Locating Evaporator Temp Connector
    G07319462Courtesy of HYUNDAI MOTOR CO.
  5. Remove the evaporator temperature sensor (A), by pulling it after rotating 90° in a counterclockwise direction.
    Fig 5: Removing Evaporator Temperature Sensor
    G07319463Courtesy of HYUNDAI MOTOR CO.
  6. Installation is the reverse order of removal.