LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2013 >> Sonata GLS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Hybrid Control System (HEV)) >> HCU (Hybrid Control Unit) >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.
WARNING: This hybrid system uses a DC 270V voltage system. Be sure to follow safety instructions below. Failure to follow safety instructions may result in serious injury or electrocution (Refer to "SAFETY PRECAUTION ").
  1. Refer to "HPCU ".
    NOTE: The HCU is integrated into the HPCU that can't be disassembled. So refer to "HPCU " for the removal or installation procedure of the HCU.
  2. Perform the clutch pressure sensor calibration (Refer to "CLUTCH PRESSURE SENSOR ").
scientia non olet · About LEMON Manuals