Water Center Pipe

Remove the intake manifold.
(Refer to "INTAKE MANIFOLD ")
Remove the water temperature control assembly.
(Refer to Cooling System - "WATER TEMPERATURE CONTROL ASSEMBLY ")
Remove the water center pipe (A).
Tightening torque:

9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

Fig 1: Identifying Water Center Pipe
Courtesy of HYUNDAI MOTOR AMERICA

NOTE: Do not reuse water pipe O-ring.
Install in the reverse order of removal.