LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2013 >> Santa Fe XL Base >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> Driveshaft Assembly >> Dynamic Damper >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Remove the front driveshaft.

    Refer to FRONT DRIVESHAFT .

  2. Remove the TJ joint assembly.

    Refer to TJ JOINT .

  3. Remove the remove the both side of band (B) of the dynamic damper (A).
    Fig 1: Dynamic Damper And Band
    G09267784Courtesy of HYUNDAI MOTOR AMERICA
  4. Fix the driveshaft (A) with a vice (B) as illustrated.
    Fig 2: Fixing Driveshaft In Vice
    G09267785Courtesy of HYUNDAI MOTOR AMERICA
  5. Apply soap powder on the shaft to prevent being damaged between the shaft spline and the dynamic damper when the dynamic damper is removed.
  6. Separate the dynamic damper (A) from the shaft (B) carefully.
    Fig 3: Dynamic Damper And Shaft
    G09267786Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals