LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2013 >> Santa Fe Sport Base, AWD >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition System - 2.4L >> Ignition Coil >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Disconnect the battery negative terminal.
  2. Remove the engine cover.
  3. Disconnect the ignition coil connector(A).
    Fig 1: Identifying Ignition Coil Connector
    G09367278Courtesy of HYUNDAI MOTOR AMERICA
    NOTE:
    • When removing the ignition coil connector, pull the lock pin(A) and push the clip (B).
    Fig 2: Removing Ignition Coil Connector
    G09367279Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the ignition coil(A).
    Fig 3: Identifying Ignition Coil
    G09367280Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals