Repair Procedures: Replacement: Removal
CAUTION:
- Put on gloves to protect your hands.
NOTE:
- Use seat covers to avoid damaging any surfaces.
- Remove the rear pillar trim.
(Refer to "REAR PILLAR TRIM ")
- Loosen the quarter fixed glass (A) mounting nuts.
Tightening torque:
3.9 ~ 4.4 N.m (0.4 ~ 0.45 kgf.m, 2.9 ~ 3.3 lb-ft)
- Cut out the sealant using the sealant cutting tool [A (09861-31000)].NOTE:
- Do not scrape down to the painted surface of the body; damaged paint will interfere with proper bonding.
Information
- Remove the rubber dam and fasteners from the body.
- Mask off surrounding surfaces before painting.
- Remove the quarter fixed glass.