Repair Procedures: Removal

Disconnect the negative (-) battery terminal.
Remove the crash pad lower panel.
(Refer to "CRASH PAD LOWER PANEL ")
Remove the steering column upper and lower shrouds.
(Refer to "STEERING COLUMN SHROUD PANEL ")
Remove the ignition switch (A) after disconnecting the 6P connector (B).

Fig 1: Identifying Ignition Switch And 6P Connector
Courtesy of HYUNDAI MOTOR AMERICA
Remove the key warning and immobilizer connector (A).

Fig 2: Identifying Key Warning And Immobilizer Connector
Courtesy of HYUNDAI MOTOR AMERICA
If it is necessary to remove the key lock cylinder (A), remove the key lock cylinder with key ACC.

Fig 3: Identifying Key Lock Cylinder

Courtesy of HYUNDAI MOTOR AMERICA