Neutralization Status Check: Notes

Connect the cable of GDS to the data link connector in driver side crash pad lower panel.
After IG ON, select the "Neutralization mode".

Fig 1: Display - Neutralization Mode Screen
Courtesy of HYUNDAI MOTOR AMERICA

Fig 2: Display - Neutralization Mode Screen
Courtesy of HYUNDAI MOTOR AMERICA

Fig 3: Display - ECM Neutralization Test Confirmation Screen
Courtesy of HYUNDAI MOTOR AMERICA

Fig 4: Display - ECM Neutralization Test Completion Screen
Courtesy of HYUNDAI MOTOR AMERICA

Fig 5: Display - SMK Neutralization Test Confirmation Screen
Courtesy of HYUNDAI MOTOR AMERICA

Fig 6: Display - SMK Neutralization Test Confirmation Screen
Courtesy of HYUNDAI MOTOR AMERICA

Fig 7: Display - SMK Neutralization Test Completion Screen
Courtesy of HYUNDAI MOTOR AMERICA