LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2013 >> Genesis Coupe 2.0T, Automatic Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission Control System >> Inhibitor Switch >> Repair Procedures >> Inspection >> Power Circuit Inspection

Power Circuit Inspection

  1. Disconnect the Inhibitor switch connector.
  2. Ignition KEY "ON" & Engine "OFF".
  3. Measure voltage between supplied power and ground at inhibitor circuit.

    Specification  : Approx. 12V

scientia non olet · About LEMON Manuals