LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2013 >> Genesis Coupe 2.0T R-Spec >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Engine Control System - 3.8L) >> Accelerator Position Sensor (APS) >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different car, the 2012 Hyundai Genesis Coupe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect a scantool on the Data Link Connector (DLC).
  2. Turn the ignition switch ON.
  3. Measure the output voltage of the APS 1 and 2 at C.T. and W.O.T.

    Specification:  Refer to "SPECIFICATION "

scientia non olet · About LEMON Manuals