LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2013 >> Genesis 3.8 >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Blower System >> Blower Unit >> Repair procedures >> Replacement

Repair procedures: Replacement

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad.

    (Refer to "CRASH PAD ")

  3. Remove the cowl cross bar assembly.

    (Refer to "CRASH PAD ")

  4. Remove the heater & blower unit.

    (Refer to "HEATER UNIT ")

  5. Remove the blower unit (A) from the heater unit after loosening a mounting bolt and 2 screws.
    Fig 1: Identifying Blower Unit With Mounting Bolt And Screws
    G08839001Courtesy of HYUNDAI MOTOR AMERICA
    NOTE: Make sure that there is no air leaking out of the blower and duct joints.
  6. Installation is the reverse order of removal.
scientia non olet · About LEMON Manuals