LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2013 >> Genesis 3.8 >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Auto Lighting Control System >> Auto Light Sensor >> Repair procedures >> Removal

Repair procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the Photo & auto light sensor (A) from defrost nozzle by using screw (-) driver.
    Fig 1: Identifying Photo And Auto Light Sensor
    G08838742Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the auto light connector.
scientia non olet · About LEMON Manuals