LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2013 >> Genesis 3.8 >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Smart Cruise Control System Diagnosis >> DTC C1260: Steering Angle Sensor Circuit-Signal >> General Information >> DTC Detecting Condition

General Information: DTC Detecting Condition

Item Detecting Condition Possible cause
DTC Strategy
  • CAN message monitoring
  • Improper alinement
  • Faulty SAS
Case1 Enable Conditions
  • After vehicle is moved over a distance of at minimum 500km.
Threshold value
  • SAS offset value > 12°
Case2 Enable Conditions
  • Engine Run (engine rpm higher than 400 at least for 2s)
  • No undervoltage detected
Threshold value
  • Abnormal checksum value
  • Abnormal message counter
Case3 Enable Conditions
  • Engine Run (engine rpm higher than 400 at least for 2s)
Threshold value
  • Abnormal SAS signal received
  • Internal state of steering angle sensor is not OK
Diagnosis Time
  • Immediately
Recover Condition
  • As soon as the signal is all right again
Fail Safe
  • Red SCC warning lamp turns on