Ignition Coil

Disconnect the LH/RH ignition coil connectors (A).

Fig 1: Identifying Ignition Coil Connectors (LH Side)
Courtesy of HYUNDAI MOTOR AMERICA

Fig 2: Identifying Ignition Coil Connectors (RH Side)
Courtesy of HYUNDAI MOTOR AMERICA

NOTE: When disconnecting the ignition coil connector, pull out the locking pin (A) and then pull out the connector while pressing the clip (B).

Fig 3: Pulling Out Locking Pin And Connector
Courtesy of HYUNDAI MOTOR AMERICA
Remove the LH/RH ignition coils (A).
Tightening torque:

9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)

Fig 4: Identifying Ignition Coils (LH Side)
Courtesy of HYUNDAI MOTOR AMERICA

Fig 5: Identifying Ignition Coils (RH Side)
Courtesy of HYUNDAI MOTOR AMERICA
Installation is reverse order of removal.