LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2013 >> Elantra SE, Automatic Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Control (ESC) System >> Troubleshooting >> Problem Symptoms Table >> Inspection procedures >> Problem verification

Problem verification

  1. Disconnect the connector from the ABS control module and turn the ignition switch ON.
  2. Does the ABS warning lamp light up?

    YES 

    • Inspect again after replacing the ABS HECU.

    NO 

    • Check the power source for the ABS warning lamp.
scientia non olet · About LEMON Manuals