LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2013 >> Elantra Limited >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System >> Accelerator Pedal >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the accelerator position sensor connector (A).
    Fig 1: Accelerator Position Sensor Connector
    G10234605Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the installation bolt (B), the nuts (C) and then remove the accelerator pedal module.
    Fig 2: Accelerator Pedal Module Installation Bolt
    G10234606Courtesy of HYUNDAI MOTOR AMERICA
    Fig 3: Accelerator Pedal Module Nuts
    G10234607Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals