LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2013 >> Elantra GLS, Automatic Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Control (ESC) System >> Troubleshooting >> Problem Symptoms Table >> Inspection procedures >> DTC Inspection

DTC Inspection

  1. Connect the GDS with the data link connector and turn the ignition switch ON.
  2. Verify that the normal code is output.
  3. Is the normal code output?

    YES 

    • Check the power source circuit.

    NO 

    • Erase the DTC and recheck using GDS.


  1. Connect the GDS with the data link connector and turn the ignition switch ON.
  2. Verify that the normal code is output.
  3. Is the normal code output?

    YES 

    • Check the wheel speed sensor circuit.

    NO 

    • Erase the DTC and recheck using GDS.
scientia non olet · About LEMON Manuals