LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2013 >> Elantra GLS, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Immobilizer System >> Immobilizer Control Unit >> Repair procedures >> Replacement

Repair procedures: Replacement

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad lower panel.

    (Refer to "CRASH PAD ")

  3. Disconnect the 5P connector of the SMARTRA unit and then remove the SMARTRA unit (A) after loosening the bolt.

    [USA] 

    Fig 1: SMARTRA Unit (USA)
    G10244338Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the immobilizer unit connector and then remove the immobilizer unit (A) and bracket. Remove the immobilizer unit from the bracket (B).
    NOTE:
    • Be careful not to damage the SMARTRA unit.

    [CANADA] 

    Fig 2: SMARTRA Unit (Canada)
    G10244339Courtesy of HYUNDAI MOTOR AMERICA
  5. Installation is the reverse of removal procedure.
scientia non olet · About LEMON Manuals