LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2013 >> Accent GLS, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Starting System >> Starter >> Repair procedures >> Cleaning

Repair procedures: Cleaning

  1. Do not immerse parts in cleaning solvent.

    Immersing the yoke assembly and/or armature will damage the insulation. Wipe these parts with a cloth only.

  2. Do not immerse the drive unit in cleaning solvent.

    The overrun clutch is pre-lubricated at the factory and solvent will wash lubrication from the clutch.

  3. The drive unit may be cleaned with a brush moistened with cleaning solvent and wiped dry with a cloth.
scientia non olet · About LEMON Manuals