General Information: DTC Detecting Condition
WARNING: This page is about a different variant/trim than selected.
DTC DETECTING CONDITION
| Item |
Detecting Condition |
Possible Cause |
| DTC Strategy |
|
- Connector looseness and poor terminal to wire connection.
- CAN HIGH/LOW circuit open/short.
- Faulty CAN MODULE. (ESP)
- Faulty 4WD-ECM.
|
| Threshold Value |
- Condition1: Wheel speed signal value is invalid (over 511.875 km/h), and maintained over 0.5 sec.
- Conditon2: Data can't be received in 0.5 sec.
- Condition3: No receiving of data for 0.5 sec after ignition is turned ON.
|
| Fail Safe |
|