Transmitter Code Registration

Connect the DLC cable of scan tool to the data link connector (16 pins) in driver side crash pad lower panel, turn the power on scan tool.

Fig 1: Connecting DLC Cable Of Scan Tool To Data Link Connector
Courtesy of HYUNDAI MOTOR CO.
Select the vehicle model and then do "CODE SAVING".

Fig 2: Scantool Display - Hyundai Vehicle Diagnosis
Courtesy of HYUNDAI MOTOR CO.
After selecting "CODE SAVING" menu, push "ENTER" key, then the screen will be shown as below.

Fig 3: Scantool Display - CODE SAVING
Courtesy of HYUNDAI MOTOR CO.
After removing the ignition key from key cylinder, push "ENTER" key to proceed to the next mode for code saving. Follow steps 1 to 4 and then code saving is completed.

Fig 4: Scantool Display - Code Saving (1 Of 4)
Courtesy of HYUNDAI MOTOR CO.

Fig 5: Scantool Display - Code Saving (2 Of 4)
Courtesy of HYUNDAI MOTOR CO.

Fig 6: Scantool Display - Code Saving (3 Of 4)
Courtesy of HYUNDAI MOTOR CO.

Fig 7: Scantool Display - Code Saving (4 Of 4)
Courtesy of HYUNDAI MOTOR CO.