General Information: DTC Detecting Condition

DTC DETECTING CONDITION TABLE

Item	Detecting Condition	Possible Cause
DTC Strategy	Check the voltage range	Faulty INPUT SPEED SENSOR Faulty PCM/TCM Signal circuit is open or short.
Enable Conditions	Engine speed > 400 rpm 10.2 V < Battery voltage < 15.5 V System is normal TCU communication = normal Shift lever switch = normal
Threshold Value	To detect no pulse while detecting output revolution sensor signal 24 pulses
Diagnostic Time	More than 500 x more than 1 sec
Fail Safe	Self learning control is inhibited Locked in 3rd gear