LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Veracruz GLS, AWD >> Repair and Diagnosis >> Steering >> Steering Column >> Steering Column & Shaft >> Repair Procedures >> Disassembly And Reassembly

Disassembly And Reassembly

  1. Make a groove on the head of special bolts (A) by a punch.
  2. Loosen the special bolt using a screw driver and then remove the key lock assembly (B) from the steering column assembly.
    Fig 1: Identifying Key Lock Assembly
    G06857461Courtesy of HYUNDAI MOTOR CO.
  3. Reassembly is the reverse of the disassembly. When reassembling the key lock assembly, install the key lock assembly to the steering column and then tighten the new special bolts until its head (A) is cut off.
    Fig 2: Identifying Special Bolts
    G06857462Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals