LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Veracruz GLS, AWD >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Airbag Modules & Clock Spring >> Driver Airbag (DAB) Module and Clock Spring >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Disconnect the battery negative cable and wait for at least three minutes before beginning work.
  2. Remove the airbag module mounting bolts (2EA).
    Fig 1: Locating Airbag Module Mounting Bolts
    G06861636Courtesy of HYUNDAI MOTOR CO.
  3. Disconnect the horn connector (A).
    Fig 2: Disconnecting Horn Connector
    G06861637Courtesy of HYUNDAI MOTOR CO.
  4. Release the connector locking pin, then disconnect the driver airbag module connector (B).
    CAUTION: The removed airbag module should be stored in a clean, dry place with the pad cover face up.
  5. Remove the steering wheel and steering wheel column cover. (Refer to STEERING COLUMN & SHAFT )
  6. Disconnect the clock spring and horn connector, then remove the clock spring.
    Fig 3: Identifying Clock Spring & Horn Connector
    G06861638Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals