LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Veracruz GLS, AWD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Blower System >> Blower Unit >> Repair Procedures >> Replacement

Repair Procedures: Replacement

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad. (Refer to CRASH PAD REPLACEMENT )
  3. Disconnect the connectors from the intake actuator, the blower motor and power mosfet.
  4. Remove the cowl cross bar assembly. (Refer to CRASH PAD )
  5. Remove the blower unit (B) from the heater unit after loosening a mounting bolt and 3 screws.
    Fig 1: Identifying Blower Unit
    G06858613Courtesy of HYUNDAI MOTOR CO.
    NOTE: Make sure that there is no air leaking out of the blower and duct joints.
  6. Installation is the reverse order of removal.
scientia non olet · About LEMON Manuals