LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Veracruz GLS, AWD >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Repair procedures >> Removal >> Water Temperature Control Assembly

Water Temperature Control Assembly

  1. Drain the engine coolant.
  2. Remove the air cleaner assembly.
  3. Disconnect the radiator upper and lower hose (A).
    Fig 1: Identifying Radiator Hose
    G06856873Courtesy of HYUNDAI MOTOR CO.
  4. Disconnect the ECT sensor connector.
  5. Disconnect the heater hose, the water vent hose and the water hose from water temperature control assembly.
  6. Remove the wiring protector.
  7. Remove the water temperature control assembly (A).
    Fig 2: Identifying Water Temperature Control Assembly
    G06856874Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals