Repair procedures: Removal: Notes

Water Pump 

1. Drain the engine coolant.
   WARNING: System is under high pressure when the engine is hot. To avoid danger of releasing scalding engine coolant, remove the cap only when the engine is cool.
2. Remove the drive belt (A).
   Fig 1: Identifying Drive Belt

   Courtesy of HYUNDAI MOTOR CO.
3. Remove the 4 bolts and the pump pulley (A).
   Fig 2: Identifying Pump Pulley

   Courtesy of HYUNDAI MOTOR CO.
4. Remove the water pump (A) and gasket.
   Fig 3: Identifying Water Pump And Gasket

   Courtesy of HYUNDAI MOTOR CO.