LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Veracruz GLS, AWD >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Repair procedures >> Installation >> Water Temperature Control Assembly

Water Temperature Control Assembly

NOTE: Clean the contact face before assembly.
  1. Install the water temperature control assembly (B) and a new gasket (A).

    Tightening torque 

    18.62 ~ 23.52Nm (1.9 ~ 2.4kgf.m, 13.74 ~ 17.36lb-ft)

    Fig 1: Identifying Water Temperature Control Assembly
    G06856884Courtesy of HYUNDAI MOTOR CO.
    NOTE: Use new O-rings (C) when reassembling.
  2. Connect water hoses to the water temperature control assembly.
  3. Install the wiring protector.
  4. Connect the ECT sensor connector.
  5. Connect the radiator upper and lower hose (A).
    Fig 2: Identifying Radiator Upper And Lower Hose
    G06856885Courtesy of HYUNDAI MOTOR CO.
  6. Install the air cleaner assembly.
  7. Fill with engine coolant.
  8. Start engine and check for leaks.
  9. Recheck engine coolant level.
scientia non olet · About LEMON Manuals