Repair procedures: Installation: Notes

Water Pump 

1. Install the water pump (A) and a new gasket (B) with 12 bolts.

   Tightening torque 

   21.56 ~ 23.52Nm (2.2 ~ 2.4kgf.m, 15.91 ~ 17.36lb-ft)

   9.80 ~ 11.76Nm (1.0 ~ 1.2kgf.m, 7.23 ~ 8.68lb-ft)

   Fig 1: Identifying Water Pump

   Courtesy of HYUNDAI MOTOR CO.
   NOTE:

   • Clean the contact face before assembly.
   • Always use a new bolt (C) and gaskets (B).
2. Install the 4 bolts and the pump pulley (A).

   Tightening torque 

   7.84 ~ 9.80Nm (0.8 ~ 1.0kgf.m, 5.78 ~ 7.23lb-ft)

   Fig 2: Identifying Pump Pulley

   Courtesy of HYUNDAI MOTOR CO.
3. Install the drive belt (A).
   Fig 3: Identifying Drive Belt

   Courtesy of HYUNDAI MOTOR CO.
4. Fill with engine coolant.
5. Start engine and check for leaks.
6. Recheck engine coolant level.