LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Veracruz GLS, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Control (ESC) System (MGH-60) >> Rear Wheel Speed Sensor >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Remove the rear driveshaft.

    (Refer to REMOVAL )

  2. Disconnect the rear wheel speed sensor connector (A).
    Fig 1: Identifying Rear Wheel Speed Sensor Connector
    G06857842Courtesy of HYUNDAI MOTOR CO.
  3. Remove the rear wheel speed sensor after remove the hub assembly mounting bolts (B).

    Tightening torque: 

    78.5 ~ 88.3 N.m (8.0 ~ 9.0 kgf.m, 57.9 ~ 65.1 lb-ft)

  4. Installation is the reverse of removal.
    NOTE: For 2WD rear wheel speed sensor is in the hub assembly.
scientia non olet · About LEMON Manuals