Repair procedures: Removal

Disconnect the negative (-) battery terminal.
Remove the third, seat.
(Refer to the THIRD SEAT )
Remove the luggage side trim.
(Refer to the "INTERIOR TRIM ")
Use a small screw driver to loosen clip (A). But do not remove power tailgate push rod (B).

Fig 1: Identifying Power Tailgate Push Rod
Courtesy of HYUNDAI MOTOR CO.
Remove the power tailgate module mounting bolts (2EA) and connectors (2EA). And then remove the power tailgate module (A).
Torque : 0.025 - 0.035 N.m (0.0025 - 0.0035 kg.m)

Fig 2: Identifying Power Tailgate Module
Courtesy of HYUNDAI MOTOR CO.
NOTE:
- Connect the connectors tightly.
- Check the power tailgate for normal operation correctly.
WARNING:
- A lost drive unit mounting bolt in the vehicle may make a noise.
- Don't operate the power tailgate when a push rod is removed.
- A learn cycle must be performed whenever the power is removed.
- Check the normal operating whenever a power tailgate component is removed or replaced. If the chime sound is heard, check the DTC, wiring harness and cable connections.