Removal and Installation

Disconnect the battery (-) terminal.
Remove the two bolts from the both sides of the wheel.

Fig 1: Locating Bolts
Courtesy of HYUNDAI MOTOR CO.
Remove the driver side air bag module (C) after disconnecting the air-bag connector (A) and the horn connector (B).

Fig 2: Identifying Driver Side Air Bag Module
Courtesy of HYUNDAI MOTOR CO.
Disconnect the cruise control switch connector (A) and then remove the cruise control switch (C) with two screws (B).

Fig 3: Identifying Cruise Control Switch Connector
Courtesy of HYUNDAI MOTOR CO.
Installation is the reverse of removal.