LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Veloster Standard Trans >> Repair and Diagnosis >> Transmission >> Manual Trans >> Manual Transaxle System >> Repair Procedures >> Inspection >> Manual Transaxle Oil Inspection

Manual Transaxle Oil Inspection

  1. Park the vehicle on a level ground and stop the engine.
  2. Retighten the oil filler plug (A) with a new washer.
    Fig 1: Identifying Oil Filler Plug
    G08807164Courtesy of HYUNDAI MOTOR AMERICA
  3. Check level with finger.
    NOTE: Oil level must be up to fill the hole, if not, add oil until it runs over.
    Fig 2: Locating Oil Level
    G08807165Courtesy of HYUNDAI MOTOR AMERICA
  4. Install the filler plug with a new gasket.

    Tightening torque: 

    58.9 ~ 78.5 N.m (6.0 ~ 8.0 kgf.m, 43.4 ~ 57.8 lb-ft)