Removal and Installation
WARNING: This page is about a different car, the 2014 Hyundai Veloster and 2013 Hyundai Veloster. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the water temperature control assembly.
(Refer to "WATER TEMPERATURE CONTROL ASSEMBLY ")
- Remove the water pipe (A).
Tightening torque
M6 bolt and nuts:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)
M8 bolt:
18.6 ~ 23.5 N.m (1.9 ~ 2.4 kgf.m, 13.7 ~ 17.4 lb-ft)
- Install in the reverse order of removal.