General Information: General Description
WARNING: This page is about a different car, the 2013 Hyundai Veloster. However, it is still accessible from the selected car via links, so may be relevant.
Information related immobilizer, that are classified as 2 (two) parts independently, is memorized in EEPROM. ECM check these 2 (two) information before proceeding immobilizer authentication. With synchronized both information, ECM starts immobilizer authentication procedure. If both information is not synchronized, ECM stops immobilizer authentication, Limphome function will not be activated, and memorizes DTC P1695. If DTC P1695 is retrieved again, after performing new key teaching procedure, ECM should be replaced with new one.