LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Veloster Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Charging System) >> Alternator >> Repair Procedures >> Repair Procedures - Turbo >> Removal

Repair Procedures - Turbo: Removal

WARNING: This page is about a different car, the 2014 Hyundai Veloster and 2013 Hyundai Veloster. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery negative terminal.
  2. Loosen the mounting bolts (A) and then, turn the adjusting bolt (B) clockwise to loosen tension.
    Fig 1: Identifying Mounting And Adjusting Bolts
    G09150290Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the drive belt (A).
    Fig 2: Identifying Drive Belt
    G09150291Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the air compressor connector (A) and the alternator connector (B), and remove the cable from alternator "B" terminal (C).
    Fig 3: Identifying Air Compressor, Alternator Connector And Terminal
    G09150292Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the alternator (A).
    Fig 4: Identifying Alternator
    G09150293Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals