LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Veloster Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Heater System) >> Temperature Control Actuator >> Repair procedures >> Replacement

Repair procedures: Replacement

WARNING: This page is about a different car, the 2014 Hyundai Veloster and 2013 Hyundai Veloster. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the heater & blower unit.

    (Refer to "HEATER UNIT ")

  3. Remove the heater unit from the blower unit.

    (Refer to "HEATER UNIT ")

  4. Loosen the mounting screws and then remove the temperature control actuator (A).
Fig 1: Temperature Control Actuator Mounting Screws
G09135468Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals