LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Veloster Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Tires/Wheels/Wheel Alignment) >> Alignment >> Repair Procedures >> Rear Wheel Alignment >> Camber

Rear Wheel Alignment: Camber

WARNING: This page is about a different car, the 2014 Hyundai Veloster and 2013 Hyundai Veloster. However, it is still accessible from the selected car via links, so may be relevant.

Camber is pre-set at the factory, so it does not need to be adjusted. If the camber is not within the standard value, replace or repair the damaged parts and then inspect again.

Camber:  -1.5°±0.5°

scientia non olet · About LEMON Manuals