LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Veloster Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Lighting System) >> Hazard Lamp Switch >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2014 Hyundai Veloster and 2013 Hyundai Veloster. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the heater control module.

    (Refer to HEATER & A/C CONTROLLER UNIT

    Fig 1: Identifying Heater Control Module
    G09135298Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals