Repair Procedures: Removal

Disconnect the negative (-) battery terminal.
Remove the hazard lamp switch assembly (A).

Fig 1: Identifying Lamp Switch Assembly
Courtesy of HYUNDAI MOTOR CO.

NOTE: Take care not to damage and scratch the hazard lamp switch assembly and its related parts.
Apply the protective tapes to the hazard lamp switch assembly and its related parts.
Disconnect the connectors (A).

Fig 2: Identifying Lamp Switch Assembly Connectors
Courtesy of HYUNDAI MOTOR CO.
Remove the center fascia panel (A).

Fig 3: Identifying Center Fascia Panel
Courtesy of HYUNDAI MOTOR CO.
Remove the AVN assembly (A) after loosening the mounting screws.

Fig 4: Identifying AVN Assembly
Courtesy of HYUNDAI MOTOR CO.
Disconnect the AVN connectors and cable (A), then remove the AVN unit completely.

Fig 5: Identifying AVN Cables
Courtesy of HYUNDAI MOTOR CO.

NOTE: When the compact disc is not ejected, do not remove it forcibly.