Repair Procedures: Removal

Remove the center console assembly. (Refer to "INTERIOR " .)
Remove the control cable (A).

Fig 1: Identifying Control Cable
Courtesy of HYUNDAI MOTOR CO.
Remove the shift lever assembly (B) by removing the bolts (A-4ea).
Tightening torque:

8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)

Fig 2: Identifying Shift Lever Assembly And Bolts
Courtesy of HYUNDAI MOTOR CO.
Remove the shift cable assembly in the vehicle after removing the nuts (B) and the retainer (A).
Tightening torque:

9.8 ~ 16.7 N.m (1.0 ~ 1.7 kgf.m, 7.2~12.3 lb-ft)

Fig 3: Identifying Nuts And Retainer
Courtesy of HYUNDAI MOTOR CO.
Remove the cable from the bracket at transaxle assembly side (Refer to "AUTOMATIC TRANSAXLE " ).
Remove the shift cable at cabin room.