LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Sonata GLS, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.4L (Except HEV) >> Crankshaft Position Sensor (CKPS) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the crankshaft position sensor connector (A).
    Fig 1: Identifying Crankshaft Position Sensor Connector
    G07366065Courtesy of HYUNDAI MOTOR CO.
  3. Remove the protector (A).
    Fig 2: Identifying Protector
    G07366066Courtesy of HYUNDAI MOTOR CO.
  4. Remove the installation bolt (A), and then remove the crankshaft position sensor.
    Fig 3: Identifying Installation Bolt
    G07366067Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals