LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Santa Fe SE, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - G3.5 DOHC >> Variable Charge Motion Actuator (VCMA) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the intake manifold. (Refer to INTAKE AND EXHAUST SYSTEM .)
  3. Remove the installation bolts (A) and nut (B), and then remove the variable charge motion actuator.
    Fig 1: Locating Variable Charge Motion Actuator Bolts And Nut
    G06844961Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals