LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Santa Fe SE, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - G3.5 DOHC >> Purge Control Solenoid Valve (PCSV) >> Repair Procedures >> Installation

Repair Procedures: Installation

CAUTION:
  • Install the component with the specified torques.
  • Note that internal damage may occur when the component is dropped. If the component has been dropped, inspect before installing.
CAUTION:
  • Be careful of foreign material not to flow into the valve.
  1. Installation is reverse of removal.

    Purge control solenoid valve bracket installation bolt:  7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m 5.8 ~ 8.7 lb-ft)

scientia non olet · About LEMON Manuals