LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Santa Fe SE, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - G3.5 DOHC >> Manifold Absolute Pressure Sensor (MAPS) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the manifold absolute pressure sensor connector (A).
  3. Remove the installation bolts (B), and then vertically remove the sensor from the surge tank.
    Fig 1: Locating Manifold Absolute Pressure Sensor Connector And Bolts
    G06844883Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals