LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Santa Fe SE, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - G3.5 DOHC >> Crankshaft Position Sensor (CKPS) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the air cleaner assembly. (Refer to INTAKE AND EXHAUST SYSTEM .)
  3. Disconnect the crankshaft position sensor connector (A).
  4. Remove the installation bolt (B), and then vertically remove the sensor from the transaxle housing.
    Fig 1: Locating Crankshaft Position Sensor Connector And Bolt
    G06844890Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals