LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Santa Fe SE, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - G3.5 DOHC >> Canister Close Valve (CCV) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the canister close valve connector (A).
  3. Disconnect the ventilation tube quick connector (B).
    Fig 1: Locating Canister Close Valve Connector And Ventilation Tube Quick Connector
    G06844955Courtesy of HYUNDAI MOTOR CO.
  4. Release the lever (A), and then remove the canister close valve & fuel tank air filter assembly (B) after rotating it in the direction of the arrow in the figure.
    Fig 2: Locating Lever And Canister Close Valve & Fuel Tank Air Filter Assembly
    G06844956Courtesy of HYUNDAI MOTOR CO.
  5. Release the lever (A), and then separate the canister close valve (B) from the fuel tank air filter (C) after rotating it in the direction of the arrow in the figure.
    Fig 3: Locating Lever
    G06844957Courtesy of HYUNDAI MOTOR CO.
    Fig 4: Locating Canister Close Valve And Fuel Tank Air Filter
    G06844958Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals