DTC C1611: CAN Time-Out ECM: DTC Detecting Condition
DTC DETECTING CONDITION CHART
| Item |
Detecting Condition |
Possible cause |
| DTC Strategy |
|
- Faulty PCM (ECM)
- Open or short in CAN communication line
- Poor connection
|
| Enable Conditions |
- In case that EMS1 or EMS2 message was not received for more than 500ms within normal voltage condition.
- The Monitoring starts 2000 ms after Power Up.
|
| Fail Safe |
- Inhibit the ESC control and allow the ABS/EBD control.
- The ESC warning lamp is activated.
- The ABS warning lamp is activated.
|