LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Genesis Coupe 3.8 Track, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition System - 3.8L >> Repair procedures >> Replacement >> Ignition Coil

Ignition Coil

  1. Remove the engine cover.
  2. Disconnect the ignition coil connectors (A).
    Fig 1: Identifying Ignition Coil Connectors
    G06509419Courtesy of HYUNDAI MOTOR CO.
    NOTE: When removing the ignition coil connector, pull the lock pin (A) and push the clip (B).
    Fig 2: Pulling Lock Pin & Pushing Clip
    G06509420Courtesy of HYUNDAI MOTOR CO.
  3. Remove the ignition coils (A).
    Fig 3: Identifying Ignition Coils
    G06509421Courtesy of HYUNDAI MOTOR CO.
  4. Installation is the reverse of removal.
scientia non olet · About LEMON Manuals