Audio Unit Assembly Replacement

WARNING: This page is about a different car, the 2013 Hyundai Genesis Coupe. However, it is still accessible from the selected car via links, so may be relevant.

Remove the center fascia panel. Refer to Center Fascia Panel Replacement .
After loosening the mounting screws, remove the audio assembly (A).

Fig 1: Identifying Audio Assembly & Mounting Screws
Courtesy of HYUNDAI MOTOR CO.
Disconnect the audio unit connectors (A).

Fig 2: Identifying Connectors
Courtesy of HYUNDAI MOTOR CO.
Installation is the reverse of removal.
NOTE:
- Make sure the connectors are plugged in properly.
- Replace any damaged clips.